Small marine actuator for Open-Close multi-turn applications. Nutating motor drive, 50-300 in. lbs.
Designed to MIL-Spec DOD-V-24657 (SH) and the marine environment, for use on multi-turn valves
- Position limit switches, individually adjustable
- OPEN and CLOSE torque limit switches
- Differential drive, low effort side mounted handwheel
- Large dial type mechanical position indicator located near the handwheel
- Integral mechanical reversing controller with valve logic and optional pushbuttons and lamps
- Thermal sensors and monitor module available
- Submersible construction standard. Submersible optional
- PROFIBUS, ModBus® and Serial communications
The Nu-Torque MSM Series actuators have been designed accordance with Mil-Spec DOD-V-24657 (SH) and the marine environment. Cast silicon bronze housings, bronze, steel and stainless steel gears, shaft and hardware resist the marine corrosion, and are also the ideal choice for applications requiring low magnetic signature. MS6 Motors are built to MIL-M-17059 or MIL-M-17060 to provide extended life under the worst of shipboard conditions. The gearing is totally enclosed and permanently lubricated with this Miltiary-Spec nutating motor electric actuator.
The MS6 Series actuators are compact and durable, reducing the stress on smaller valves where Navy High Shock and Vibration qualifications are required.
Actuator Specifications: |
Quarter-Turn |
|
Model No. |
MS_Q |
Housing |
Cast Silicon Bronze |
Hardware |
Corrosion Resistant |
Handwheel |
10" Direct Drive |
Worm |
14-4PH Stainless Steel |
Gear |
Cast and machined manganese bronze |
Bearing |
Taper roller |
Switches |
250 VAC, 10 AMP |
Motor |
0.50 HP
0.75 HP
1.00 HP
1.25 HP |
Output Torque |
400-1000 In Lbs
700-1500 In Lbs
1000-2000 In Lbs
1000-2500 In Lbs |
Weight |
125-135 Lbs. |
The data and specifications in this bulletin are for information purposes only. Consult your Nu-Torque representative for specific data. |