Industrial Electric Valve Actuator E03, E05, E15

Product Brand: Nu-Torque

Small basic Open-Close actuator, 0-600 in. lbs,
Mid-range Open-Close actuator, 500-5000 in. lbs,
Upper Mid-range Open-Close actuator, 2000-15000 in. lbs


Designed to meet the requirements of the marine environment

  • Position limit switches, individually adjustable
  • OPEN and CLOSE torque limit switches
  • Differential drive, low effort side mounted handwheel
  • Mechanical position indicator located near the handwheel and on top
  • Mechanical stops for quarter-turn applications, adjustable from 85 to 95 degrees
  • Integral mechanical reversing controller with valve logic
  • Thermal sensors and monitor module available

The Nu-Torque E and MI Series Industrial Valve Actuators have been designed to meet the requirements of the marine environment. Cast aluminum, ductile iron or silicon bronze housings, bronze and steel gears, shafts and hardware resist the marine corrosion and are also the ideal choice for applications requiring low magnetic components. E and MI Actuator motors used are built to IEEE-45 standards to provide extended life under the worst shipboard conditions.

The E and MI Series actuators are compact and durable reducing the stress on smaller valves.

The E and MI Series actuator can be supplied for Quarter-Turn and Multi-Turn applications.

Options

  • Local controls (pushbuttons and lights — local/remote switch)
  • Smart actuators—PROFIBUS,
  • LONWORKS®, ModBus® and DeviceNet™
  • Right angle gearbox for limited overhead locations
Actuator Specifications:
Quarter-Turn  
Model No. E05, E15 MI12M
Housing Cast Aluminum, Ductile Iron and Silicon Bronze
Hardware Corrosion Resistant
Handwheel 3 to 6" with Spinner
Magnetic Permeability Less than 2.0 When required
Switches 250 VAC, 10 AMP
Motor Voltage 115 VAC, Single Phase, 60 Hz
440-480 VAC, 3 Phase, 60 Hz
Reduction Ratio 5:1, 15:1, 25:1 & 25:1
Output Torque 250-20,000 Inch Lbs.
Output Speed 15 to 60 Seconds/90 Degrees
Weight 40-105 Lbs.
Multi-Turn  
Model No. E05, E15 MI12M
Housing Cast Silicon Bronze
Hardware Corrosion Resistant
Handwheel 2 - 8" Spinner
Magnetic Permeability Less than 2.0 When required
Switches 250 VAC, 10 AMP
Motor Voltage 115 VAC, Single Phase, 60 Hz
440-480 VAC, 3 Phase, 60 Hz
Reduction Ratio 1:1
Output Torque 100-2,000 Inch Lbs.
Output Speed 12 to 36 RPM
Weight 70-95 Lbs..
The data and specifications in this bulletin are for information purposes only. Consult your Nu-Torque representative for specific data.
Industrial Electric Valve Actuator E03, E05, E15
Product Enquiry>>
 Security code
* Required